Functions of the Control Box 3.5
With the control box 3.5, the speed (rpm) measurement, regulation and control is possible.The adjustment of the working width is easy and an automatic slider (tractor linkage sensor optional) is also installed.The calibration test and emptying work with the push of a button.An integrated acre/hectare and hour meter provide overview at one glance.
In case of proper tractor cabling of the signal plug1, the driving speed and the tractor linkage signal are recorded and displayed on the control box.
Cable length: 4.9 ft (1,5 m)
1 Attention: The signal plug must be designed and equipped tractor-side according to the norm. Signal cables are not suitable for John Deere tractors.
Tractor linkage upper bar sensor (accessory kit)
Optimally suited for 3-point mounted implements.
For mounting on a second top link hole. Function: mechanical operation of a spring rod. The metering shutter is automatically released or stopped (invertible).
Cable length: 9.8 ft (3 m)
Tractor linkage lower bar sensor (accessory kit)
For mounting on movable parts in headland. Function: contactless through a magnet. The metering shutter is automatically released or stopped (invertible).
Cable length: 16.4 ft (5 m)
Tractor linkage pull switch sensor (accessory kit)
For mounting on 3-point or on moving parts in headland. Function: pull operation through a spring. The metering shutter is automatically released or stopped (invertible).
Cable length: 16.4 ft (5 m)
Hydraulic tractor linkage sensor (accessory kit)
The sensor can be integrated into an implement on an existing hydraulic system (e.g.: lower bar cylinder). Function: operation through change of pressure in the hydraulic system. The metering shutter is automatically released or stopped. The switching pressure can be set between 20 to 50 bar.
Cable length: 16.4 ft (5 m)
Lateral distribution curve
When developing the ES 100 M3 Special, we mainly focused on two aspects: Optimization for the output of slug pellets: In order to further improve the performance of Disc Spreaders, particularly in connection with slug pellets, the throwing vane configuration and design were optimised in collaboration with the French institute IRSTEA. The results are great - best lateral distribution values even with maximum working widths. Our optimised device achieves a working width of up to 91.8 ft (28 m) with a variation coefficient that is smaller than 10 %.